Honest answers to the most common questions about epoxy garage floors, polyaspartic coatings, and concrete preparation in Denver and Aurora, Colorado.
Epoxy garage floor cost in Denver and Aurora typically ranges from $5 to $9 per square foot for professional installation. A standard 2-car garage (400-500 sq ft) ranges from $2,000 to $4,500.
Pricing breakdown by system:
• Flake epoxy: $5-7 per sq ft
• Polyaspartic: $6-9 per sq ft
• Metallic epoxy: $9+ per sq ft
• Commercial systems: $7+ per sq ft
BM Epoxy Floors provides free written estimates for every project. Call (720) 757-3545 to schedule.
Yes, professional epoxy garage floors increase home value, especially in Colorado where buyers prioritize garage condition. Real estate agents report epoxy floors can add $2,000-5,000 to a home's appraised value and significantly speed up sale times.
The clean, finished look creates strong first impressions during showings - a stained or cracked garage floor signals deferred maintenance to buyers.
DIY epoxy kits from hardware stores typically last only 2-3 years before peeling. Here's why:
• They use water-based products at low solids content (~50%)
• They use acid etching instead of diamond grinding
• Their thin topcoats fail under hot tires
• Surface prep is rarely sufficient
Professional installations use 100% solids epoxy with polyaspartic topcoats and proper diamond grinding for 10-15 year durability. The cost difference is usually $1,000-2,000 but the lifespan is 5x longer.
Yes, BM Epoxy Floors provides free written estimates for every project in Denver, Aurora, and the surrounding Front Range. We come to your location, measure the space, assess concrete condition, and discuss color options.
Same-day response is available in most cases. Call (720) 757-3545 or fill out our online form to schedule.
Polyaspartic is generally better for Colorado's climate. Here's why:
• 4x more abrasion resistant than epoxy
• UV stable - won't yellow in sunlight
• Installs in temperatures as low as 35°F
• Cures in hours instead of days
• Resists hot tire pickup that peels epoxy
Epoxy works well as a base layer when topped with polyaspartic - that's the best of both worlds, and it's what BM Epoxy Floors uses for residential garages.
Yes, polyaspartic floor coatings can be installed in a single day in Denver and Aurora.
The process includes:
1. Diamond grinding (1-2 hours)
2. Base coat application (30 min)
3. Flake broadcast
4. Clear polyaspartic topcoat
You can walk on the floor in a few hours and park your vehicle on it the next day. Traditional epoxy systems take 2-3 days due to longer cure times.
Polyaspartic coatings can be installed year-round in Colorado, even in cold winters, as they cure properly down to 35°F.
Traditional epoxy requires warmer temperatures (55°F or higher) and longer cure times. BM Epoxy Floors uses polyaspartic systems that allow us to install garage floors throughout Denver and Aurora winters when other companies cannot work.
A professional epoxy garage floor in Colorado lasts 10-15 years when properly installed with diamond grinding and a polyaspartic topcoat.
The polyaspartic topcoat protects against:
• UV radiation (Colorado is at 5,280 ft - UV is 25% stronger)
• Hot tire pickup
• Freeze-thaw cycles (100+ per year)
• De-icing salts and magnesium chloride
DIY epoxy kits typically only last 2-3 years before peeling.
Yes, all concrete cracks and spalls must be repaired before applying epoxy or polyaspartic coatings.
BM Epoxy Floors fills cracks with flexible polyurea repair compounds, then diamond grinds the entire surface. This professional prep prevents cracks from telegraphing through the new coating and ensures a smooth, long-lasting finish.
Diamond grinding uses industrial diamond-tipped tools to remove the top layer of concrete and create a porous surface profile. This is the most important step in any professional epoxy installation.
It accomplishes three critical things:
1. Removes contaminants like oil and old sealers
2. Opens the concrete pores so coating can penetrate deeply
3. Creates the mechanical bond needed for 10-15 year durability
Acid etching is not a substitute for diamond grinding. If a contractor doesn't grind, walk away.
With our polyaspartic system:
• Walk on it in 4-6 hours
• Park your vehicle the next day (24 hours after final coat)
• Heavy items / chemicals: wait 7 days for full chemical cure
Traditional epoxy systems typically require 3-5 days before driving on them. Always wait the full cure time before placing heavy items or water on a new floor.
Before installation day:
1. Remove all items from your garage (vehicles, tools, shelving, storage)
2. Ensure power outlets are accessible for our equipment
3. Avoid chemical cleaners on the floor for two weeks before installation
Our team handles all dust containment and cleanup. Most homeowners can return belongings to the garage within 24-48 hours of completion.
Yes, BM Epoxy Floors specializes in removing failed epoxy and concrete coatings.
We use industrial diamond grinders to grind down the old coating to bare concrete, then prepare the surface and install a new long-lasting system. This is more expensive than first-time installation due to extra grinding time, but it gives you a fresh, professional floor that will last 10-15 years.
Cleaning an epoxy garage floor is simple:
• Daily: Sweep with a soft broom or use a dust mop
• Weekly: Mop with mild soap and warm water
• Tough stains (oil): Use a degreaser
• Pressure washing: Safe on professionally installed polyaspartic floors
Avoid: harsh acids, ammonia-based cleaners, abrasive scrub pads.
Hot tire pickup is the #1 reason epoxy floors fail. Plasticizers in tires migrate into low-quality coatings when tires are hot from driving, causing peeling.
BM Epoxy Floors prevents this by:
1. Diamond ground concrete for proper bonding
2. 100% solids epoxy primer that chemically bonds to concrete
3. Polyaspartic topcoat with hot tire pickup resistance
Our floors are warrantied against tire pickup for one year.
Standard epoxy and polyaspartic can be slippery when wet, but BM Epoxy Floors adds a non-slip aggregate or full flake broadcast to every garage floor installation.
The flake creates surface texture that provides excellent traction, even when wet from snow, rain, or oil. We can adjust the level of texture to your preference during installation.
Our written 1-year warranty covers:
✓ Peeling and delamination
✓ Hot tire pickup
✓ Bubbling caused by installation issues
The warranty applies to every residential install and is provided in writing at project completion.
Not covered: Damage from chemical spills, heavy impact, or improper cleaning.
Most floors last 10-15 years - but our warranty proves we stand behind our work.
BM Epoxy Floors offers dozens of color options:
• Classic: gray, tan, black
• Bold: blue, red, earth tones
• Multi-color flake: 2-4 chip color combinations
• Metallic: pearlescent 3D finishes resembling marble or liquid metal
We bring physical samples to every estimate so you can see and feel the colors in your garage lighting.
Choose flake epoxy if:
• You want classic durability with multi-color chips
• You need slip resistance
• You want to hide imperfections and dust well
Choose metallic epoxy if:
• You want a luxury, showroom appearance
• You love 3D pearlescent depth
• You're creating a showpiece garage, basement, or retail space
• You want a one-of-a-kind designer look
Metallic costs about 50% more but creates a unique floor that no one else has.
Yes, BM Epoxy Floors serves the entire Denver metro area:
✓ Denver
✓ Aurora (our home base)
✓ Centennial
✓ Parker
✓ Thornton
✓ Westminster
✓ Arvada
✓ Lakewood
✓ Highlands Ranch and surrounding Front Range
We offer same-day estimate response throughout our service area.
Yes, epoxy and polyaspartic coatings work great on basement floors. They:
✓ Create a moisture barrier
✓ Are easy to clean
✓ Resist mildew
✓ Look professional
We test for moisture before installation since basements can have higher humidity. A vapor barrier coating may be added if moisture readings are elevated to ensure proper adhesion.
Yes, epoxy and polyaspartic are ideal for commercial and industrial spaces in Denver. They:
✓ Handle heavy traffic
✓ Resist chemicals
✓ Are easy to clean
✓ Meet OSHA slip resistance requirements
BM Epoxy Floors installs commercial coatings for:
• Warehouses
• Auto shops
• Restaurants
• Retail spaces
• Manufacturing facilities
Commercial systems use thicker base coats and may include chemical-resistant topcoats.
Get answers from a real epoxy expert. Free estimate, no obligation.